Heavy Wall Capillary - Glass Tubing
Heavy Wall - Glass Tubing is available in a broad combination of inner and outer diameters (ID and OD).
Standard OD Tolerances;
3.000 mm +/- 0.100
4.000 mm +/- 0.150
5.500 mm +/- 0.200
6.200 mm +/- 0.250
Standard glass type is; Borosilicate
Standard Lengths; 300 mm and 600 mm
Standard End Finish; Snap Cut
Choose from our Standard Product list below or design your own and choose: Sizes, Length, Tolerances, Glass Type (Borosilicate, Clear Fused Quartz, Synthetic Fused Silica, or Other), and End Finish (Snap Cut, Saw Cut, Lapped Ends, Fire Polished Ends, or One End Sealed) using our
| Product | ID (mm) | ID TOL +/- (mm) | Outside Diameter (mm) |
|---|---|---|---|
| HWC001 | 0.025 | 0.003 | 3.0, 4.0, 5.5, or 6.2 |
| HWC002 | 0.050 | 0.003 | 3.0, 4.0, 5.5, or 6.2 |
| HWC003 | 0.075 | 0.005 | 3.0, 4.0, 5.5, or 6.2 |
| HWC004 | 0.100 | 0.005 | 3.0, 4.0, 5.5, or 6.2 |
| HWC005 | 0.125 | 0.008 | 3.0, 4.0, 5.5, or 6.2 |
| HWC006 | 0.150 | 0.008 | 3.0, 4.0, 5.5, or 6.2 |
| HWC007 | 0.175 | 0.008 | 3.0, 4.0, 5.5, or 6.2 |
| HWC008 | 0.200 | 0.008 | 3.0, 4.0, 5.5, or 6.2 |
| HWC009 | 0.225 | 0.010 | 3.0, 4.0, 5.5, or 6.2 |
| HWC010 | 0.250 | 0.010 | 3.0, 4.0, 5.5, or 6.2 |
| HWC011 | 0.275 | 0.010 | 3.0, 4.0, 5.5, or 6.2 |
| HWC012 | 0.300 | 0.010 | 3.0, 4.0, 5.5, or 6.2 |
| HWC013 | 0.325 | 0.013 | 3.0, 4.0, 5.5, or 6.2 |
| HWC014 | 0.350 | 0.013 | 3.0, 4.0, 5.5, or 6.2 |
| HWC015 | 0.375 | 0.013 | 3.0, 4.0, 5.5, or 6.2 |
| HWC016 | 0.400 | 0.013 | 3.0, 4.0, 5.5, or 6.2 |
| HWC017 | 0.425 | 0.015 | 3.0, 4.0, 5.5, or 6.2 |
| HWC018 | 0.450 | 0.015 | 3.0, 4.0, 5.5, or 6.2 |
| HWC019 | 0.475 | 0.015 | 3.0, 4.0, 5.5, or 6.2 |
| HWC020 | 0.500 | 0.015 | 3.0, 4.0, 5.5, or 6.2 |
