Fiber Optic Ferrules and Alignment Sleeves

medicalVitroCom manufactures ultra high quality precision glass ferrules and alignment sleeves for the Fiber Optic market from Borosilicate and Clear Fused Quartz glasses. These custom made ferrules are made to a customer's specfication utilizing our proprietary technology and processes. We offer a variety of blown, acid etched or drilled countersink lead-ins, or any combination of the aforementioned, with inner diameter tolerances of +/-0.001 mm and better.

Alignment sleeves are precision drawn products made to a customer's specification with Clear Fused Quartz glass and various types of Borosilicate glasses (N51A, Soda Lime, etc.). In Clear fused Quartz, the UV transmission characteristics of this glass allow the customer the benefit of using UV curable epoxies. In addition, metalization of the outer surface of the sleeves is also possible, enabling the soldering of these sleeves to metal for hermetic packaging.

Contact us for a custom quote or to discuss your particular product requirements. We're at your service.
Figure 1

Figure 2

  • DIMENSIONAL GUIDE: Fig. 1 & 2
  • A = Overall Length =/- Tolerance
  • B = Depth of Counter Sink or Lead-In +/- Tolerance
  • C = Counter Sink or Lead-In Diameter +/- Tolerance
  • D = Outer Diameter +/- Tolerance
  • E = Inner Diameter +/- Tolerance

Figure 3

  • FOR COUNTER SINK+LEAD-IN: Fig.3
  • A = Overall Length +/- Tolerance
  • B = Depth of Counter Sink+/- Tolerance
  • C = Diameter Of Counter Sink +/- Tolerance
  • D = Outer Diameter +/- Tolerance
  • E = Inner Diameter +/_ Tolerance
  • F = Diameter of Lead-In +/- Tolerance
  • G = Depth of Lead-In +/- Tolerance

Examples of possible configurations*

LEAD-IN/BLOWN

ETCHED LEAD-IN

COUNTER-SINK/LEAD-IN

LEAD-IN/BLOWN

COUNTER-SINK/LEAD-IN

COUNTER-SINK/LEAD-IN